We sell the complete line of JKS products. Listed below are just some of our favorites that we run on our rigs. Contact us for information on products not shown. 

We'll match any competitors advertised pricing on JKS products!

 JKS Manufacturing offers some of the best performance suspension and armor components in the off-road industry and we've been very impressed with their products. They are user friendly and super beefy.  JKS Products are considered to be the most innovative and best quality designs on the market today.

Our personal armor favorites from JKS

Front axle lower control arm bracket MiniSkids. Click image for more info.

SuperNerfs for rocker panel protection. Click image for more info. 

'84 - Present TJ/XJ/ZJ "Quicker" Disconnects

FREE SHIPPING!

One of the single most important things to improve your jeep's off-road capability is a good set of sway bar quick disconnects. Even if you DON'T want to lift your jeep, a set of JKS disco's are a low buck way to dramatically improve your suspension articulation. This allows your jeep to keep it's tires planted on the trail, which keeps you moving forward! Need more info? Give us a call!

Need to secure your JKS disco's up & out of the way on your XJ? Click Here...
List Price $153.00 Your Price $130.00
  • Totally length adjustable for fitting various size lift kits and/or un-level Jeeps
  • "NEW" exclusive stationary pin design
  • Stainless steel stationary pin
  • Greasable durathane fluted bushings
  • "NEW" exclusive single grease zerk greases both bushings at one time
  • Robotically MIG welded for unsurpassed strength and quality
  • Complete bolt-on kit, no welding, drilling or tapping required
  • Gloss black powder coated on top of cadmium plating for double protection
  • Unique top mount U-strap for superior strength
  • Unique floating durathane bushings for silent operation
  • Available from stock to 6 inches of lift

DPG Product Evaluation

We believe the new JKS "Quicker" disconnects are the absolute best on the market. Super beefy and totally silent. Adjustability is vital to a good disconnect. Top mount U-strap mounts over the top of the sway bar. Very strong design. (some brands attach to the sway bar with only one bolt.) Don't accept a disconnect that rattles, rusts, bends, breaks or is hard to reconnect. Get JKS the first time!

"Quicker" Disconnects for WJ/YJ/CJ

FREE SHIPPING!
List Price $153.00  Your Price $130.00!!!
  • Length adjustable to accommodate different size lift kits and/or un-level Jeeps
  • Remove entire disconnect from Jeep simply by pulling two pins
  • Unique floating durathane bushings for silent operation
  • Adapt these to any CJ or YJ Jeep
  • Requires welding bottom tab to axle tube (CJ/YJ only) for lower disconnect mount
  • Stainless steel pins, powder coated, robotically MIG welded for superior strength and quality.
  • Available for '76 - '95 CJ or YJ (any lift)
  • Available for WJ from stock to 3 1/2 inches of lift (no welding required)

Adjustable Control Arms

FREE SHIPPING!

LCA (Lower Control Arm)

JKS lower control arms are the heaviest duty units on the market today. Uni-body Jeeps tend to transfer more road noise or suspension noise than do Jeeps with frames. JKS uses the factory OEM rubber bushing at both ends of their control arms to reduce those annoying noises. These control arms twist or rotate while driving allowing the axle to flex easily. With over 3 inches of adjustment, adjusting the length is as simple as removing one end and rotating the body or shaft to the desired length.

Thread strength can be thought of like axle spline strength, the more the axle splines there are, the stronger the axle is. JKS uses eighteen threads per inch on their lower control arms, not "acme" threads (typically five threads per inch) that tend to be weak and have very little fine-tuning ability.

The adjusting shaft rides on a brass bushing and is then sealed to keep out dirt. Each unit is then filled with grease to help keep out all moisture and maintain the threads.

Black powder coating and zinc plating are standard.

Part# 6100  All TJ, XJ, ZJ, WJ (Front or Rear)   List Price $352.00  Your Price $299.00!

UCA (Upper Control Arm)

JKS upper control arms are built to the same exact standards as their lower control arms. Again, with over 3 inches of adjustment in pinion angle, our control arms can be fine tuned quickly and easily. Factory OEM style rubber bushings are used at each end.

The front upper control arms utilize an exclusive modular design only available from JKS. The design is far superior in strength than anything else on the market, yet can be completely disassembled.

Upper control arms as well as lower control arms can be rebuilt with simple hand tools if required.

Simply the best control arms available...

Part# 7100 All TJ, XJ, ZJ, WJ (Front)   List Price $311.00  Your Price $264.00!     

 Part# 7101 All TJ, ZJ (Rear)   List Price $290.00  Your Price $246.00!

DPG Product Evaluation

These new control arms from JKS are the beefiest, smoothest, most reliable arms we've seen ANYWHERE! No more Johnny Joints to have to grease, adjust or rebuild. No more heim joints to replace. The use of rubber bushings for a quiet, smooth ride is possible since the articulating function of the arms makes life easier on the bushings, allowing them to have a long life. This also makes life MUCH easier on your frame and axle mounts! JKS adjustable control arms are simply the ONLY choice for our Jeeps!

Adjustable Coil Over Spacer (ACOS™)

FREE SHIPPING!
List Price $247.00  Your Price $209.00!
  • JKS Manufacturing, Inc. has teamed up with ORGS Manufacturing in offering our new "Adjustable Coil Over Spacer" or "ACOS™" system. This system will allow the end user to fine tune or adjust his/her suspension system to accommodate for different variables such as the added weight of bumpers, winches, sagging springs, tire size changes, leveling vehicles front-to-back, or leveling vehicles side-to-side. 
  • There is a minimum of 1.25" of lift built into the "ACOS™" system and is infinitely adjustable there after.
  • The "ACOS™" system is designed to be adjusted while on the vehicle in just a few minutes. 
  • The "ACOS™" system is an excellent tool for dialing in any suspension lift kit. Simply unload the coil spring, loosen one bolt and turn the adjuster ring to increase or decrease height.
  • Available for '84 - Present XJ, TJ, & ZJ Front Coil Suspension and for TJ Rear Suspension!

 

Adjustable Track Bars

FREE SHIPPING!
Adjustable Front Track bar ( TJ, XJ, ZJ)   List price $240.00 Your price$204.00
Adjustable Front Track bar (WJ)   List Price $160.00 Your Price$136.00
Adjustable Rear Track bar (ZJ)   List Price $160.00 Your Price$136.00
Adjustable Rear Track bar (TJ 0-2" lift)   List Price $160.00 Your Price $136.00
Adjustable Rear Track bar (TJ 3.5" or more)  (w/ Currie Ent. Relocation Bracket)
List Price $290.00 Your Price $246.00

  • Beefy 1.25" x .156 DOM Tubing

  • Bent to proper angles for various lifts

  • Greasable & Rebuildable Johnny joint at frame end (front track bars - except WJ)

  • Factory OEM Style Rubber bushing at axle end to reduce bushing noise transfer (all rear track bars use OEM Style rubber bushings at both ends)

  • Cadmium plated adjuster at axle end

  • Flat black powder coated for corrosion protection

DPG Product Evaluation: 

The Beefiest Track bar we've seen.  One turn of the adjuster shifts the axle by approximately 1/16" at a time, so you may fine tune your axle center very precisely. We've sold a bunch of these bars to hard-wheeling jeepers without a single Johnny joint failure so far. Quiet and durable.  This is easily our favorite aftermarket track bar.

Bar Pin Eliminators

#9603 (Front) (XJ, TJ, ZJ, WJ)  List Price $44.00 Your Price $37.00 

#9604 (Rear) (XJ, TJ)  List Price $47.00 Your Price $39.00 

  • Exclusive 3 piece design preloads (or compresses) the shock bushing to eliminate rattles
  • Preloads "EBI" shock bushings to proper bushing specifications
  • Cadmium plated for superior rust protection
  • A complete bolt-on kit
  • Grade 8 fasteners included
  • Rear BPE's are our original 2 piece design using allen head bolts
  • Rear BPE's include stainless steel roll pins
  • Available for TJ, XJ, or ZJ

DPG Product Evaluation:

Trick product that works great in eliminating those rattles or thumping noises caused by OEM shock bar pins. The only bar pin eliminators we know of that retain stock shock pivot angles. Of course like all JKS products, they're extremely beefy. The "hot set-up" for mounting shocks on your jeep!

Shock Conversions
List Price $35.00 Your Price $29.00!
  • Converts S1 style shock to the more conventional "EBI" mount
  • "EBI" mount shocks are more readily available, therefore more shock options
  • Uses 7/8" bolt to fill the existing body hole without slop
  • Includes 1/2" grade 5 cross bolt
  • Already formed to the proper pre-load dimensions specified by many bushing manufactures
  • XJ and YJ conversions have a 10 degree offset to maintain 90 degrees to shank
  • Available for XJ, YJ, TJ, or ZJ

We sell all JKS products. For a complete line go to: www.jksmfg.com and

Contact Us for discounted pricing!

Remember- We GUARANTEE you won't find a lower price on JKS Products!

TO PLACE AN ORDER PLEASE CALL:

(316) 776-9900

Return To Suspension